Diving Connector-RMG/RMK

Rubber Molded Dummy Connector - 3 Socket Female RMG-3-FSD Features: Standard Rubber Molded Dummy Connector Mated Pressure Rating: 20,000 psi Female Socket Number of Contacts: 3 Mates With: RMG-3-MP, XSG-3-BCL, XSG-3-PBC, XSG-3-PBCL and XSG-3-PBCLM Specifications: Material: Special Neoprene, Molded Voltage Rating: 600 VDC-contact factory for higher voltage requirements

Rubber Molded Dummy Connector - 3 Pin Male RMG-3-MPD Features: Standard Rubber Molded Dummy Connector Low Pressure Mates With: RMG-3-FS Specifications: Material: Special Neoprene, Molded Voltage Rating: 600 VDC-contact Pressure Rating, Mated: 4,000 PSI

Rubber Molded Dummy Connector - 4 Socket Female RMG-4-FSD Features: Standard Rubber Molded Dummy Connector Mated Pressure Rating: 20,000 psi Female Socket Number of Contacts: 4 Mates With: RMG-4-MP, XSG-4-BCL, XSG-4-PBC, XSG-4-PBCL and XSG-4-PBCLM Specifications: Material: Special Neoprene, Molded Voltage Rating: 600 VDC-contact factory for higher voltage requirements

Rubber Molded Dummy Connector - 4 Pin Male RMG-4-MPD Features: Standard Rubber Molded Dummy Connector Low Pressure Mates With: RMG-4-FS and RMG-4-FS Specifications: Material: Special Neoprene, Molded Voltage Rating: 600 VDC-contact factory for higher voltage requirements Pressure Rating, Mated: 4,000 PSI

Rubber Molded Dummy Connector - 5 Socket Female RMK-5-FSD The RM rubber molded series is a connector used for underwater applications. The mold of the connectors is made from vulcanized neoprene that makes for a durable water tight seal. Each contact can be used on 600 volt and is capable of transferring at least 12 ampere. The dummy is used for protecting the connector and the contacts when there is nothing attached to the connector.

Rubber Molded Dummy Connector - 5 Pin Male RMK-5-MPD The RM rubber molded series is a connector used for underwater applications. The mold of the connectors is made from vulcanized neoprene that makes for a durable water tight seal. Each contact can be used on 600 volt and is capable of transferring at least 12 ampere. The dummy is used for protecting the connector and the contacts when there is nothing attached to the connector.

Hi-USE connector is used on many products. The most common are our EMA-2 and ComRopes. The 4P has 2 pins and 2 sockets. The 4P can be connected underwater. Roll over the alternate view images to see a pair connected. Our Hi-Use connector is one of the most popular wet pluggable connectors available.

Hi-Use connector, 2 male pins & 2 female sockets potting sleeve

Termination ”Y” Splice – TermY – SCIL8M To MCIL3F and RMG3F

OEM Underwater Connectors and Cables for your diving system RMG-4FS RMG-4MP BH4M IL4F MCBH4M MCIL4F XSG-5-BCL

Rubber Molded Bulkhead Connector - 1Pin Male XSG--BCL The 1 Pin Male Rubber Molded Bulkhead Connector is made from glass reinforced epoxy. Specifications: Rubber molded bulkhead connector Connector: Male 1 pin Material: Glass reinforced epoxy Contacts: Copper alloy, hard gold plated

E/O cable, wet E/O connector, E/O cord E/O cable – wet connector is used to connect underwater power to heated clothing or diving flashlights.